Here is the stereo radio wiring information for your 2015 Nissan Rogue body with the normal or Bose amplified systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your Rogue. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.
If you find any conflicting info please leave a comment with what you found in your Nissan Rogue. If you don’t see the audio radio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!
Need A Remote Start? Check out Accessorides.com
2015 Nissan Rogue Stereo Audio Wiring Radio Diagram Schematic Colors – Aftermarket Install
Car Radio Constant 12v+ Wire: Blue @ Radio Harness Pin 19
Car Stereo Ground Wire: Black @ Main Radio Harness Pin 20
Car Radio Ignition Switched Wire: Light Green or White @ Main Radio Harness
Car Radio Illumination Wire: Purple + @ Main Radio Harness Pin 9
Reverse / Backup Wire: Light Purple/Green (+) Driver Kick BCM or harness to rear
Car Radio Amp Turn On Wire: Brown @ Radio Harness
Car Stereo Power Antenna: Black @ Radio Antenna Plug
Non-Bose Speaker Wires At Radio:
Left Front Speaker (+) Positive: White
Left Front Speaker (-) Negative: Pink
Right Front Speaker (+) Positive: Green
Right Front Speaker (-) Negative: Purple
Left Rear Speaker (+) Positive: Gray
Left Rear Speaker (-) Negative: Brown
Right Rear Speaker (+) Positive: Light Green
Right Rear Speaker (-) Negative: Yellow
SPEAKER WIRE COLORS ALTERNATE @ AMP UNDER PASSENGER SEAT
Left Front Door Speaker Wire (+) Positive: Brown
Left Front Door Speaker Wire (-) Negative: Pink
Left Front Tweeter Speaker Wire (+) Positive: White
Left Front Tweeter Speaker Wire (-) Negative: Gray
Right Front Door Speaker Wire (+) Positive: Green
Right Front Door Speaker Wire (-) Negative: Red
Right Front Tweeter Speaker Wire (+) Positive: Green
Right Front Tweeter Speaker Wire (-) Negative: Red
Left Rear Door Speaker Wire (+) Positive: Blue
Left Rear Door Speaker Wire (-) Negative: Red
Right Rear Door Speaker Wire (+) Positive: Light Green
Right Rear Door Speaker Wire (-) Negative: Purple
Center Channel Speaker Wire Positive / Negative: Violet / Tan
Subwoofer Speaker Wire Positive / Negative: Yellow/ Brown
Retain OEM AUX In Center Console – 16-pin Connector at Back of Radio
Take a normal rca cable and cut one end off leaving yourself RCAs and a foot or two of slack. Strip the left and right ends twist the common shields together and then connect them to the following wires:
OEM AUX Left (+) Positive: Blue
OEM AUX Right (+) Positive: Green
OEM AUX Common Shield: Yellow
Radio Size: Single or Double Din
Radio Removal Tools: – Dash Removal Plastic Pry Tools
REQUIRED PARTS FOR AFTERMARKET RADIO INSTALL
MOUNTING KIT FOR DOUBLE DIN AFTERMARKET RADIOS:
MOUNTING KIT FOR SINGLE DIN AFTERMARKET RADIOS:
WIRING HARNESS:
This harness can be used with the amp or non-bose or bose systems.
ANTENNA ADAPTER:
STEERING WHEEL CONTROLS ADAPTER:
Metra Axxess ASWC-1 Universal Steering Wheel Control Interface
Adding A Backup Camera:
We’ve had great luck with this camera for a nice rear view. Mounted on the OEM lip above the license plate you see just a hair of the bumper in the image so you can really dial in your parking.
SPEAKER WIRING ADAPTERS:
N/A
RECOMMENDED TOOLS FOR THE INSTALL – SAME ONES THE PROS USE!
– Dash Removal Plastic Pry Tools
