2015 Chrysler 200 Car Radio Audio Stereo Wiring Diagram Colors

Here is the stereo radio wiring information for your 2015 Chrysler 200 with the standard, premium,  symphony, or Bose systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your 200. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.

2015 Chrysler 200 audio wiring diagram radio

If you find any conflicting info please leave a comment with what you found in your Chrysler 200. If you don’t see the wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!

2015 Chrysler 200 Car Audio Stereo Radio Wiring Diagram Schematic Colors

Car Radio Constant 12v+ Wire: Red
Car Stereo Ground Wire: Black
Car Radio Ignition Switched Wire: N/A CAN

Car Stereo Dimmer Wire: N/A CAN
Car Radio Illumination Wire:
Car Stereo Power Antenna:
Car Radio Amp Turn On Wire:

Left Front Speaker Wire (+) Positive: Gray/Purple @ Back of Radio
Left Front Speaker Wire (-) Negative: Gray/Yellow
Right Front Speaker Wire (+) Positive: Dark Green/Purple
Right Front Speaker Wire (-) Negative: Dark Green/Yellow

Left Rear Speaker Wire (+) Positive: Gray/Light Green
Left Rear Speaker Wire (-) Negative: Gray/Dark Green
Right Rear Speaker Wire (+) Positive: Dark Green/Light Green
Right Rear Speaker Wire (-) Negative: Dark Green/Gray

Center Channel Speaker Wire Positive / Negative: Gray/Brown & Gray/Orange @ Amp

Subwoofer Speaker Wire Positive / Negative: Gray/Brown & Dark Green Brown @ Amp

Subwoofer Speaker Wire Positive / Negative: Gray/White & Dark Green/White @ Amplifier

Front Speaker Size: N/A

Rear Speaker Size: N/A

Amp Amplifier Location: Passenger side behind glovebox

Radio Removal: See Service Manual

Keep in mind if you are installing a new radio you may need the radio removal  keys, the wiring harness, the antenna adapter, and the mounting kit as well. We always recommend using the appropriate interface adapters in case you want to reinstall your OEM radio later. See the links below to purchase these items.

RECOMMENDED TOOLS FOR THE INSTALL – SAME ONES THE PROS USE!

– Klein Wire Cutters / Crimpers

– Gardner Bender Auto Wire Stripper

– Dash Removal Plastic Pry Tools

– 3M Electrical Tape

– Install Bay Butt Connectors

16 thoughts on “2015 Chrysler 200 Car Radio Audio Stereo Wiring Diagram Colors”

  1. Do you guys have the wire diagram Goethe 2015 Chrysler 200C with the Alpine System 506 amp? Also the speaker sizes are 6×9 front doors and rear deck and 3.5 dash and rear doors.

    1. 22 – Pin Connector At The Amp

      1 – Black – GROUND
      2 – White / Light Green – CAN IHS (+)
      3 – N/A
      4 – Dark Green / Dark Blue – LEFT REAR SPEAKER (+)
      5 – Gray / Dark Blue – RIGHT REAR SPEAKER (+)
      6 – Dark Green – RADIO LEFT FRONT AUDIO (+)
      7 – Gray – RADIO RIGHT FRONT AUDIO (+)
      8 – Gray / Light Green – AMPLIFIED RIGHT DASH SPEAKER (-)
      9 – Gray / Yellow – AMPLIFIED LEFT DASH SPEAKER (-)
      10 – Gray / Light Green – LEFT REAR SPEAKER (+)
      11 – Gray / Brown – AMPLIFIED CENTER DASH SPEAKER (+)
      12 – Red – FUSED B(+)
      13 – White – CAN IHS (-)
      14 – N/A
      15 – Dark Green / Orange – LEFT REAR SPEAKER (-)
      16 – Gray / Orange – RIGHT REAR SPEAKER (-)
      17 – Dark Green / Brown – RADIO LEFT FRONT AUDIO (-)
      18 – Gray / Brown – RADIO RIGHT FRONT AUDIO (-)
      19 – Gray / Dark Green – AMPLIFIED RIGHT DASH SPEAKER (+)
      20 – Gray / Orange – AMPLIFIED LEFT DASH SPEAKER (+)
      21 – Gray / Dark Green – LEFT REAR SPEAKER (-)
      22 – Gray / Orange – AMPLIFIED CENTER DASH SPEAKER (-)

  2. 16-Pin Connector At Amp

    1 – Dark Green / Gray – RIGHT REAR SPEAKER (-)
    2 – N/A
    3 – Gray / White – AMPLIFIED SUBWOOFER 2 (+)
    4 – Dark Green / Brown – AMPLIFIED RIGHT REAR SPEAKER (+)
    5 – Dark Green / Gray – AMPLIFIED LEFT REAR SPEAKER (-)
    6 – Dark Green / Brown – AMPLIFIED SUBWOOFER 1 (-)
    7 – Dark Green / Purple – RIGHT FRONT SPEAKER (+)
    8 – Gray / Purple – LEFT FRONT SPEAKER (+)
    9 – Dark Green / Light Green – RIGHT REAR SPEAKER (+)
    10 – N/A
    11 – Dark Green / White – AMPLIFIED SUBWOOFER 2 (-)
    12 – Yellow / Gray – AMPLIFIED RIGHT REAR SPEAKER (-)
    13 – Dark Green / Tan – AMPLIFIED LEFT REAR SPEAKER (+)
    14 – Gray / Brown – AMPLIFIED SUBWOOFER 1 (+)
    15 – Dark Green / Yellow – RIGHT FRONT SPEAKER (-)
    16 – Gray / Yellow – LEFT FRONT SPEAKER (-)

  3. I have a chrysler 200lx 2015 i would like to know if its possible to put my subwoofer and my amp myself with the original radio. Thank you

  4. Which cable would I connect my amplifiers turn on wire to?
    I know the red one isn’t because it’s the constant 12v.

    1. You would need an ignition source for your amp turn on. Since the radio turns on via CAN you can’t find it there. GO to any cig lighter that is switched on and off with the key and tap in there! Hope it helps,

    1. yes you can follow the driver side under the carpet and if you go into the engine bay over behind the battery you can slip a wire through this hole you can see right into it cant miss it huge gape for the power cable

    1. Remote turn on would be run to any key/switched source. If any of the cigarette lighters / power points turn off with the key you could go to them or any fuse in the fusebox that is ignition/accessory and not battery power should work.

  5. The audio plug for my chrisler 200, 2015 is broke and I have no radio signal can i change the plug by my self and what i need to do or buy?
    My stereo have the plug, the plug from the cable is broke

Leave a Reply

Your email address will not be published. Required fields are marked *