Here is the info for bypassing the parking brake lockout on the Pioneer AVH-X4600BT. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed. This information is provided for informational purposes only and should not be used while driving.
Pioneer AVH-X4600BT Parking Brake Bypass
If you find any conflicting info please leave a comment with what you found with your AVH X4600BT AVH-X4600BT. If you don’t see the audio radio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!
USE THE MICRO BYPASS USED BELOW:
Easy to install 3-wire hookup and works great! Very small in size easy to hide.
Here is the stereo radio wiring information for your 2008 Ford F-150 F150 body with the standard or amplified systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your F-150 Pickup. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.
2008 Ford F-150 Audio Wiring Diagram Radio Schematic Colors
If you find any conflicting info please leave a comment with what you found in your 2 or 4 door 2008 Ford F-150. If you don’t see the audio radio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!
2008 Ford F-150 & FX4 Audio Wiring Radio Diagram Schematic Colors
Car Radio Constant 12v+ Wire: Light Green/Violet Car Stereo Ground Wire: Black/Green or Black Car Radio Ignition Switched Wire: Light Green/Yellow or Pink/Black @ Radio Harness
Car Stereo VSS Speed Wire: Gray/Black @ Main Radio Plug Car Stereo Reverse Wire + : Pink/Black or Green/Yellow @ Driver door sill harness Car Stereo Dimmer Wire: Light Blue/Red @ Main Radio Harness Car Radio Illumination Wire: Brown (Park Lights) @ Driver door sill harness Car Stereo Power Antenna: Car Radio Amp Turn On Wire: Dark Green/Violet @ Smaller Amp Plug behind radio
Left Front Speaker Wire (+) Positive: Orange/Light Green Left Front Speaker Wire (-) Negative: Light Blue/White Right Front Speaker Wire (+) Positive: White/Light Green Right Front Speaker Wire (-) Negative: Dark Green/Orange
Left Rear Speaker Wire (+) Positive: Gray/Light Blue Left Rear Speaker Wire (-) Negative: Tan/Yellow Right Rear Speaker Wire (+) Positive: Orange/Red Right Rear Speaker Wire (-) Negative: Brown/Pink
Center Channel Speaker Wire Positive / Negative: N/A
OEM AUX Audio Left Signal: Red @ 16 pin connector pin 7 OEM AUX Audio Left Ground: White @ 16 pin connector pin 8 OEM AUX Audio Right Signal: Orange @ 16 pin connector pin 6 OEM AUX Audio Right Ground Pink @ 16 pin connector pin 14
You may also use the adapters below to install common 6.5″ speakers in the 6×8″ locations:
Radio Removal: Using plastic bezel removal tools carefully pop the radio bezel from the dash. Unplug all the connectors and remove the dash bezel. The radio is then held in with 4 7mm screws.
Keep in mind if you are installing a new radio you need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well. During installation we recommend removing some of the plastic behind the OEM radio to help fit the new aftermarket radio all the way in the dash.
REQUIRED PARTS FOR AFTERMARKET RADIO INSTALL
WIRING HARNESS WITHOUT OEM SUBWOOFER:
WIRING HARNESS WITH OEM SUB WOOFER:
MOUNTING KIT FOR SINGLE DIN AFTERMARKET RADIOS:
MOUNTING KIT FOR DOUBLE DIN AFTERMARKET RADIOS:
OEM AMP TURN ON POP FIX :
If you’re experiencing a loud pop through your F150 sub when the radio turns on and off, this interface will correct the issue by stepping down the turn on voltage to your OEM amplifier.
CUSTOM UNDER SEAT BOX ENCLOSURE FOR ADDING AFTERMARKET SUB WOOFER:
RETAIN YOUR OEM AUX JACK WITH THE NEW RADIO:
ANTENNA ADAPTER FOR INSTALL:
Only required for trucks 2007 and up. No adapter required for pre 2007 Ford F-150
SPEAKER WIRING ADAPTER FOR INSTALL:
Use these if you don’t want to tap in or cut off your existing speaker connectors. They plug right in then right on to the new speaker making installation a breeze. Order quantity 2 if doing front and rear speakers.
Here is the stereo radio wiring information for your 2006 Ford F-150 F150 body with the standard or amplified systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your F-150 Pickup. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.
2006 Ford F-150 Audio Wiring Radio Diagram Schematic Colors
If you find any conflicting info please leave a comment with what you found in your 2 or 4 door 2006 Ford F-150. If you don’t see the audio radio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!
2006 Ford F-150 & FX4 Audio Wiring Radio Diagram Schematic Colors
Car Radio Constant 12v+ Wire: Light Green/Violet Car Stereo Ground Wire: Black/Green or Black Car Radio Ignition Switched Wire: Light Green/Yellow or Pink/Black @ Radio Harness
Car Stereo VSS Speed Wire: Gray/Black @ Main Radio Plug Car Stereo Reverse Wire + : Pink/Black or Green/Yellow @ Driver door sill harness Car Stereo Dimmer Wire: Light Blue/Red @ Main Radio Harness Car Radio Illumination Wire: Brown (Park Lights) @ Driver door sill harness Car Stereo Power Antenna: Car Radio Amp Turn On Wire: Dark Green/Violet @ Smaller Amp Plug behind radio
Left Front Speaker Wire (+) Positive: Orange/Light Green Left Front Speaker Wire (-) Negative: Light Blue/White Right Front Speaker Wire (+) Positive: White/Light Green Right Front Speaker Wire (-) Negative: Dark Green/Orange
Left Rear Speaker Wire (+) Positive: Gray/Light Blue Left Rear Speaker Wire (-) Negative: Tan/Yellow Right Rear Speaker Wire (+) Positive: Orange/Red Right Rear Speaker Wire (-) Negative: Brown/Pink
Center Channel Speaker Wire Positive / Negative: N/A
Radio Removal: Using plastic bezel removal tools carefully pop the radio bezel from the dash. Unplug all the connectors and remove the dash bezel. The radio is then held in with 4 7mm screws.
Keep in mind if you are installing a new radio you need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well. During installation we recommend removing some of the plastic behind the OEM radio to help fit the new aftermarket radio all the way in the dash.
REQUIRED PARTS FOR AFTERMARKET RADIO INSTALL
WIRING HARNESS WITHOUT OEM SUBWOOFER:
WIRING HARNESS WITH OEM SUB WOOFER:
MOUNTING KIT FOR SINGLE DIN AFTERMARKET RADIOS:
MOUNTING KIT FOR DOUBLE DIN AFTERMARKET RADIOS:
OEM AMP TURN ON POP FIX :
If you’re experiencing a loud pop through your F150 sub when the radio turns on and off, this interface will correct the issue by stepping down the turn on voltage to your OEM amplifier.
CUSTOM UNDER SEAT BOX ENCLOSURE FOR ADDING AFTERMARKET SUB WOOFER:
ANTENNA ADAPTER FOR INSTALL:
Only required for trucks 2007 and up. No adapter required for pre 2007 Ford F-150
SPEAKER WIRING ADAPTER FOR INSTALL:
Use these if you don’t want to tap in or cut off your existing speaker connectors. They plug right in then right on to the new speaker making installation a breeze. Order quantity 2 if doing front and rear speakers.
Here is the stereo radio wiring information for your 2005 Ford F-150 F150 body with the standard or amplified systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your F-150 Pickup. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.
2005 Ford F-150 Audio Radio Wiring
If you find any conflicting info please leave a comment with what you found in your Ford F-150. If you don’t see the audio radio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!
2005 Ford F-150 & FX4 Audio Wiring Radio Diagram Schematic Colors
Car Radio Constant 12v+ Wire: Light Green/Violet Car Stereo Ground Wire: Black/Green or Black Car Radio Ignition Switched Wire: Light Green/Yellow or Pink/Black @ Radio Harness
Car Stereo VSS Speed Wire: Gray/Black @ Main Radio Plug Car Stereo Reverse Wire + : Pink/Black or Green/Yellow @ Driver door sill harness Car Stereo Dimmer Wire: Light Blue/Red @ Main Radio Harness Car Radio Illumination Wire: Brown (Park Lights) @ Driver door sill harness Car Stereo Power Antenna: Car Radio Amp Turn On Wire: Dark Green/Violet @ Smaller Amp Plug behind radio
Left Front Speaker Wire (+) Positive: Orange/Light Green Left Front Speaker Wire (-) Negative: Light Blue/White Right Front Speaker Wire (+) Positive: White/Light Green Right Front Speaker Wire (-) Negative: Dark Green/Orange
Left Rear Speaker Wire (+) Positive: Gray/Light Blue Left Rear Speaker Wire (-) Negative: Tan/Yellow Right Rear Speaker Wire (+) Positive: Orange/Red Right Rear Speaker Wire (-) Negative: Brown/Pink
Center Channel Speaker Wire Positive / Negative: N/A
Radio Removal: Using plastic bezel removal tools carefully pop the radio bezel from the dash. Unplug all the connectors and remove the dash bezel. The radio is then held in with 4 7mm screws.
Keep in mind if you are installing a new radio you need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well. During installation we recommend removing some of the plastic behind the OEM radio to help fit the new aftermarket radio all the way in the dash.
REQUIRED PARTS FOR AFTERMARKET RADIO INSTALL
WIRING HARNESS WITHOUT OEM SUBWOOFER:
WIRING HARNESS WITH OEM SUB WOOFER:
MOUNTING KIT FOR DOUBLE DIN AFTERMARKET RADIOS:
MOUNTING KIT FOR SINGLE DIN AFTERMARKET RADIOS:
OEM AMP TURN ON POP FIX :
If you’re experiencing a loud pop through your F150 sub when the radio turns on and off, this interface will correct the issue by stepping down the turn on voltage to your OEM amplifier.
CUSTOM UNDER SEAT BOX ENCLOSURE FOR ADDING AFTERMARKET SUB WOOFER:
ANTENNA ADAPTER FOR INSTALL:
Only required for trucks 2007 and up. No adapter required for pre 2007 Ford F-150
SPEAKER WIRING ADAPTER FOR INSTALL:
Use these if you don’t want to tap in or cut off your existing speaker connectors. They plug right in then right on to the new speaker making installation a breeze. Order quantity 2 if doing front and rear speakers.
Here is the stereo radio wiring information for your 2004 Ford F-150 F150 body with the standard or amplified systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your F-150 Pickup. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.
2004 Ford F-150 Radio Audio Wiring
If you find any conflicting info please leave a comment with what you found in your Ford F-150. If you don’t see the audio radio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!
2004 Ford F-150 Audio Wiring Radio Diagram Schematic Colors
Car Radio Constant 12v+ Wire: Light Green/Violet Car Stereo Ground Wire: Black/Green or Black Car Radio Ignition Switched Wire: Light Green/Yellow or Pink/Black @ Radio Harness
Car Stereo VSS Speed Wire: Gray/Black @ Main Radio Plug Car Stereo Reverse Wire + : Pink/Black or Green/Yellow @ Driver door sill harness Car Stereo Dimmer Wire: Light Blue/Red @ Main Radio Harness Car Radio Illumination Wire: Brown (Park Lights) @ Driver door sill harness Car Stereo Power Antenna: Car Radio Amp Turn On Wire: Dark Green/Violet @ Smaller Amp Plug behind radio
Left Front Speaker Wire (+) Positive: Orange/Light Green Left Front Speaker Wire (-) Negative: Light Blue/White Right Front Speaker Wire (+) Positive: White/Light Green Right Front Speaker Wire (-) Negative: Dark Green/Orange
Left Rear Speaker Wire (+) Positive: Gray/Light Blue Left Rear Speaker Wire (-) Negative: Tan/Yellow Right Rear Speaker Wire (+) Positive: Orange/Red Right Rear Speaker Wire (-) Negative: Brown/Pink
Center Channel Speaker Wire Positive / Negative: N/A
Radio Removal: Using plastic bezel removal tools carefully pop the radio bezel from the dash. Unplug all the connectors and remove the dash bezel. The radio is then held in with 4 7mm screws.
Keep in mind if you are installing a new radio you need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well. During installation we recommend removing some of the plastic behind the OEM radio to help fit the new aftermarket radio all the way in the dash.
REQUIRED PARTS FOR AFTERMARKET RADIO INSTALL
WIRING HARNESS WITHOUT OEM SUBWOOFER:
WIRING HARNESS WITH OEM SUB WOOFER:
MOUNTING KIT FOR DOUBLE DIN AFTERMARKET RADIOS:
MOUNTING KIT FOR SINGLE DIN AFTERMARKET RADIOS:
OEM AMP TURN ON POP FIX :
If you’re experiencing a loud pop through your F150 sub when the radio turns on and off, this interface will correct the issue by stepping down the turn on voltage to your OEM amplifier.
ANTENNA ADAPTER FOR INSTALL:
Only required for trucks 2007 and up. No adapter required for pre 2007 Ford F-150
SPEAKER WIRING ADAPTER FOR INSTALL:
Use these if you don’t want to tap in or cut off your existing speaker connectors. They plug right in then right on to the new speaker making installation a breeze. Order quantity 2 if doing front and rear speakers.
Here is the stereo radio wiring information for your 1998 VW Beetle body with the standard, symphony, Monsoon, or Bose systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your Volkswagen Beetle. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.
1998 VW Beetle Audio Wiring Diagram
If you find any conflicting info please leave a comment with what you found in your VW Beetle. If you don’t see the audio radio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!
1998 VW Beetle Audio Wiring Radio Diagram Schematic Colors
Car Radio Constant 12v+ Wire: Red/White Car Stereo Ground Wire: Brown Car Radio Ignition Switched Wire: Yellow/Red @ Defroster Switch
Car Stereo Dimmer Wire: Car Radio Illumination Wire:Gray/Blue @ Defroster Switch Car Stereo Power Antenna: Car Radio Amp Turn On Wire:
Left Front Speaker Wire (+) Positive: Light Blue/White Left Front Speaker Wire (-) Negative: Brown/White Right Front Speaker Wire (+) Positive: Red Right Front Speaker Wire (-) Negative: Brown/Red
Left Rear Speaker Wire (+) Positive: Red/Green Left Rear Speaker Wire (-) Negative: Brown/Green Right Rear Speaker Wire (+) Positive: Light Blue Right Rear Speaker Wire (-) Negative: Brown/Light Blue
Center Channel Speaker Wire Positive / Negative:
Subwoofer Speaker Wire Positive / Negative:
1998 Beetle Radio Pinout
Radio Size: 1 Din – Single Din
Radio Removal: Requires VW Beetle Radio Removal Keys
Keep in mind if you are installing a new radio you need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well. During installation we recommend removing some of the plastic behind the OEM radio to help fit the new aftermarket radio all the way in the dash.
Here is the stereo radio wiring information for your 1996 BMW 318i E36 body with the standard, symphony, or Bose systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your BMW. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.
If you find any conflicting info please leave a comment with what you found in your BMW 318i. If you don’t see the audio radio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!
1996 BMW 318i E36 Radio Wiring Diagram Audio Schematic Colors
Car Radio Constant 12v+ Wire: Red/White Car Stereo Ground Wire: Brown Car Radio Ignition Switched Wire: Purple/White
Car Stereo Dimmer Wire: Gray/Red Car Radio Illumination Wire:Gray/Red Car Stereo Power Antenna:White Car Radio Amp Turn On Wire:White
Left Front Speaker Wire (+) Positive: Yellow/Red Left Front Speaker Wire (-) Negative: Brown/Orange Right Front Speaker Wire (+) Positive: Blue/Red Right Front Speaker Wire (-) Negative: Brown/Orange
Left Rear Speaker Wire (+) Positive: Yellow/Black Left Rear Speaker Wire (-) Negative: Brown/Orange Right Rear Speaker Wire (+) Positive: Blue/Black Right Rear Speaker Wire (-) Negative: Brown/Orange
Center Channel Speaker Wire Positive / Negative:
Subwoofer Speaker Wire Positive / Negative:
Radio Size: 1 Din – Single Din
Radio Removal: Refer to service manual
Keep in mind if you are installing a new radio you may need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well.
Here is the stereo radio wiring information for your 2007 Jeep Grand Cherokee WK body with the standard, symphony, or Bose systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your Grand Cherokee. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.
If you find any conflicting info please leave a comment with what you found in your WK Grand Cherokee. If you don’t see the audio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!
2007 WK Jeep Grand Cherokee Radio Wiring Diagram Audio Schematic Colors
Car Radio Constant 12v+ Wire: Red/Orange Car Stereo Ground Wire: Black Car Radio Ignition Switched Wire: N/A DATA – Red/Light Green or Pink/Yellow or Pink/Green @ Power Port
Car Stereo Dimmer Wire: Orange/Brown @ Climate Control Connector Car Radio Illumination Wire: N/A DATA Car Stereo Power Antenna: Car Radio Amp Turn On Wire: N/A DATA
Left Front Speaker Wire (+) Positive: Dark Green Left Front Speaker Wire (-) Negative: Dark Green/Brown Right Front Speaker Wire (+) Positive: Gray Right Front Speaker Wire (-) Negative: Gray/Brown
Left Rear Speaker Wire (+) Positive: Dark Green/Dark Blue Left Rear Speaker Wire (-) Negative: Dark Green/Purple Right Rear Speaker Wire (+) Positive: Gray/Dark Blue Right Rear Speaker Wire (-) Negative: Gray/Tan
Center Channel Speaker Wire Positive / Negative:
Subwoofer Speaker Wire Positive / Negative:
SPEAKER WIRE COLORS AT THE SPEAKERS
Driver Door Pos + : Gray/Purple or Dark Green/Purple Driver Door Neg – : Dark Green/Yellow or Gray/Yellow
Passenger Door Pos + : Dark Green/Purple Passenger Door Neg – : Gray/Yellow or Dark Green/Yellow
Passenger Dash Pos + : Gray/Dark Green Passenger Dash Neg – : Gray/Light Green
LR Left Rear Door Pos + : Gray/Light Green LR Left Rear Door Neg – : Gray/Dark Green
RR Right Rear Door Pos + : Dark Green/Light Green RR Right Rear Door Neg – : Light Green/Gray
Front Speaker Size: 6×9″ Front Doors
Upper Dash Speaker Size: 3.5″
Rear Speaker Size: 6.5″ Rear Doors
Amp Amplifier Location: Cargo Area Behind Trim
Radio Size: 1.5 Din
Radio Removal: The panel around the radio is only held on by clips just use these pry tools and carefully pry it off. It may be tight if it was never removed before. Once removed the radio is secured with 4 Phillips screws.
Keep in mind if you are installing a new radio you may need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well.
Here is the stereo radio wiring information for your 2006 Jeep Grand Cherokee WK body with the standard, symphony, or Bose systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your Grand Cherokee. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.
If you find any conflicting info please leave a comment with what you found in your WK Grand Cherokee. If you don’t see the audio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!
2006 Jeep Grand Cherokee Radio Wiring Diagram Audio Schematic Colors
Car Radio Constant 12v+ Wire: Red/Orange Car Stereo Ground Wire: Black Car Radio Ignition Switched Wire: N/A DATA – Red/Light Green or Pink/Yellow or Pink/Green @ Power Port
Car Stereo Dimmer Wire: Orange/Brown @ Climate Control Connector Car Radio Illumination Wire: N/A DATA Car Stereo Power Antenna: Car Radio Amp Turn On Wire: N/A DATA
Left Front Speaker Wire (+) Positive: Gray/Orange Left Front Speaker Wire (-) Negative: Gray/Yellow Right Front Speaker Wire (+) Positive: Gray/Dark Green Right Front Speaker Wire (-) Negative: Gray/Light Green
Left Rear Speaker Wire (+) Positive: Dark Green/Dark Blue Left Rear Speaker Wire (-) Negative: Dark Green/Purple Right Rear Speaker Wire (+) Positive: Gray/Dark Blue Right Rear Speaker Wire (-) Negative: Gray/Tan
Center Channel Speaker Wire Positive / Negative:
Subwoofer Speaker Wire Positive / Negative:
SPEAKER WIRE COLORS AT THE SPEAKERS
Driver Door Pos + : Gray/Purple or Dark Green/Purple Driver Door Neg – : Gray/Yellow or Dark Green/Yellow
Passenger Door Pos + : Dark Green/Purple Passenger Door Neg – : Gray/Yellow or Dark Green/Yellow
LR Left Rear Door Pos + : Gray/Light Green or Dark Green/Light Green LR Left Rear Door Neg – : Gray/Dark Green or Light Green/Gray
RR Right Rear Door Pos + : Gray/Light Green or Dark Green/Light Green RR Right Rear Door Neg – : Gray/Dark Green or Light Green/Gray
Front Speaker Size: 6×9″ Front Doors
Upper Dash Speaker Size: 3.5″
Rear Speaker Size: 6.5″ Rear Doors
Amp Amplifier Location: Cargo Area Behind Trim
Radio Size: 1.5 Din
Radio Removal: The panel around the radio is only held on by clips just use these pry tools and carefully pry it off. It may be tight if it was never removed before. Once removed the radio is secured with 4 Phillips screws.
Keep in mind if you are installing a new radio you may need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well.
Here is the stereo radio wiring information for your 2015 Chrysler 200 with the standard, premium, symphony, or Bose systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your 200. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.
If you find any conflicting info please leave a comment with what you found in your Chrysler 200. If you don’t see the wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!
2015 Chrysler 200 Car Audio Stereo Radio Wiring Diagram Schematic Colors
Car Radio Constant 12v+ Wire: Red Car Stereo Ground Wire: Black Car Radio Ignition Switched Wire: N/A CAN
Car Stereo Dimmer Wire: N/A CAN Car Radio Illumination Wire: Car Stereo Power Antenna: Car Radio Amp Turn On Wire:
Left Front Speaker Wire (+) Positive: Gray/Purple @ Back of Radio Left Front Speaker Wire (-) Negative: Gray/Yellow Right Front Speaker Wire (+) Positive: Dark Green/Purple Right Front Speaker Wire (-) Negative: Dark Green/Yellow
Left Rear Speaker Wire (+) Positive: Gray/Light Green Left Rear Speaker Wire (-) Negative: Gray/Dark Green Right Rear Speaker Wire (+) Positive: Dark Green/Light Green Right Rear Speaker Wire (-) Negative: Dark Green/Gray
Amp Amplifier Location: Passenger side behind glovebox
Radio Removal: See Service Manual
Keep in mind if you are installing a new radio you may need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well. We always recommend using the appropriate interface adapters in case you want to reinstall your OEM radio later. See the links below to purchase these items.
RECOMMENDED TOOLS FOR THE INSTALL – SAME ONES THE PROS USE!
carefully pop the radio bezel from the dash. Unplug all the connectors and remove the dash bezel. The radio is then held in with 4 7mm screws.
