Tag Archives: install

2005 Ford F-150 Audio Wiring Radio Diagram Schematic Colors

Here is the stereo radio wiring information for your 2005 Ford F-150 F150 body with the standard or amplified systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your F-150 Pickup. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.

2005 Ford F-150 Audio Radio Wiring
2005 Ford F-150 Audio Radio Wiring

If you find any conflicting info please leave a comment with what you found in your Ford F-150. If you don’t see the audio radio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!

2005 Ford F-150 & FX4 Audio Wiring Radio Diagram Schematic Colors

Car Radio Constant 12v+ Wire: Light Green/Violet
Car Stereo Ground Wire: Black/Green or Black
Car Radio Ignition Switched Wire: Light Green/Yellow or Pink/Black @ Radio Harness

Car Stereo VSS Speed Wire: Gray/Black @ Main Radio Plug
Car Stereo Reverse Wire + : Pink/Black or Green/Yellow @ Driver door sill harness
Car Stereo Dimmer Wire: Light Blue/Red @ Main Radio Harness
Car Radio Illumination Wire: Brown (Park Lights) @ Driver door sill harness
Car Stereo Power Antenna:
Car Radio Amp Turn On Wire: Dark Green/Violet @ Smaller Amp Plug behind radio

Left Front Speaker Wire (+) Positive: Orange/Light Green
Left Front Speaker Wire (-) Negative: Light Blue/White
Right Front Speaker Wire (+) Positive: White/Light Green
Right Front Speaker Wire (-) Negative: Dark Green/Orange

Left Rear Speaker Wire (+) Positive: Gray/Light Blue
Left Rear Speaker Wire (-) Negative: Tan/Yellow
Right Rear Speaker Wire (+) Positive: Orange/Red
Right Rear Speaker Wire (-) Negative: Brown/Pink

Center Channel Speaker Wire Positive / Negative: N/A

Subwoofer Speaker Wire Positive / Negative: Brown/Orange & Red/Black

Radio Size: Single or Double Din

Radio Removal: Using plastic bezel removal tools carefully pop the radio bezel from the dash. Unplug all the connectors and remove the dash bezel. The radio is then held in with 4 7mm screws.

Keep in mind if you are installing a new radio you need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well. During installation we recommend removing some of the plastic behind the OEM radio to help fit the new aftermarket radio all the way in the dash.

REQUIRED PARTS FOR AFTERMARKET RADIO INSTALL

WIRING HARNESS WITHOUT OEM SUBWOOFER:

WIRING HARNESS WITH OEM SUB WOOFER:

MOUNTING KIT FOR DOUBLE DIN AFTERMARKET RADIOS:

MOUNTING KIT FOR SINGLE DIN AFTERMARKET RADIOS:

OEM AMP TURN ON POP FIX :

If you’re experiencing a loud pop through your F150 sub when the radio turns on and off, this interface will correct the issue by stepping down the turn on voltage to your OEM amplifier.

CUSTOM UNDER SEAT BOX ENCLOSURE FOR ADDING AFTERMARKET SUB WOOFER:

ANTENNA ADAPTER FOR INSTALL:

Only required for trucks 2007 and up. No adapter required for pre 2007 Ford F-150

SPEAKER WIRING ADAPTER FOR INSTALL:

Use these if you don’t want to tap in or cut off your existing speaker connectors. They plug right in then right on to the new speaker making installation a breeze. Order quantity 2 if doing front and rear speakers.

STEERING WHEEL CONTROLS ADAPTER:
Metra Axxess ASWC-1 Universal Steering Wheel Control Interface

RECOMMENDED TOOLS FOR THE INSTALL – SAME ONES THE PROS USE!

– 3M Electrical Tape

– Install Bay Butt Connectors

– Klein Wire Cutters / Crimpers

– Gardner Bender Auto Wire Stripper

– Dash Removal Plastic Pry Tools

2004 Ford F-150 Audio Wiring Radio Diagram Schematic Colors

Here is the stereo radio wiring information for your 2004 Ford F-150 F150 body with the standard or amplified systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your F-150 Pickup. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.

2004 Ford F-150 Radio Audio Wiring Diagram
2004 Ford F-150 Radio Audio Wiring

If you find any conflicting info please leave a comment with what you found in your Ford F-150. If you don’t see the audio radio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!

2004 Ford F-150 Audio Wiring Radio Diagram Schematic Colors

Car Radio Constant 12v+ Wire: Light Green/Violet
Car Stereo Ground Wire: Black/Green or Black
Car Radio Ignition Switched Wire: Light Green/Yellow or Pink/Black @ Radio Harness

Car Stereo VSS Speed Wire: Gray/Black @ Main Radio Plug
Car Stereo Reverse Wire + : Pink/Black or Green/Yellow @ Driver door sill harness
Car Stereo Dimmer Wire: Light Blue/Red @ Main Radio Harness
Car Radio Illumination Wire: Brown (Park Lights) @ Driver door sill harness
Car Stereo Power Antenna:
Car Radio Amp Turn On Wire: Dark Green/Violet @ Smaller Amp Plug behind radio

Left Front Speaker Wire (+) Positive: Orange/Light Green
Left Front Speaker Wire (-) Negative: Light Blue/White
Right Front Speaker Wire (+) Positive: White/Light Green
Right Front Speaker Wire (-) Negative: Dark Green/Orange

Left Rear Speaker Wire (+) Positive: Gray/Light Blue
Left Rear Speaker Wire (-) Negative: Tan/Yellow
Right Rear Speaker Wire (+) Positive: Orange/Red
Right Rear Speaker Wire (-) Negative: Brown/Pink

Center Channel Speaker Wire Positive / Negative: N/A

Subwoofer Speaker Wire Positive / Negative: Brown/Orange & Red/Black

Radio Size: Single or Double Din

Radio Removal: Using plastic bezel removal tools carefully pop the radio bezel from the dash. Unplug all the connectors and remove the dash bezel. The radio is then held in with 4 7mm screws.

Keep in mind if you are installing a new radio you need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well. During installation we recommend removing some of the plastic behind the OEM radio to help fit the new aftermarket radio all the way in the dash.

REQUIRED PARTS FOR AFTERMARKET RADIO INSTALL

WIRING HARNESS WITHOUT OEM SUBWOOFER:

WIRING HARNESS WITH OEM SUB WOOFER:

MOUNTING KIT FOR DOUBLE DIN AFTERMARKET RADIOS:

MOUNTING KIT FOR SINGLE DIN AFTERMARKET RADIOS:

OEM AMP TURN ON POP FIX :

If you’re experiencing a loud pop through your F150 sub when the radio turns on and off, this interface will correct the issue by stepping down the turn on voltage to your OEM amplifier.

ANTENNA ADAPTER FOR INSTALL:

Only required for trucks 2007 and up. No adapter required for pre 2007 Ford F-150

SPEAKER WIRING ADAPTER FOR INSTALL:

Use these if you don’t want to tap in or cut off your existing speaker connectors. They plug right in then right on to the new speaker making installation a breeze. Order quantity 2 if doing front and rear speakers.

STEERING WHEEL CONTROLS ADAPTER:
Metra Axxess ASWC-1 Universal Steering Wheel Control Interface

RECOMMENDED TOOLS FOR THE INSTALL – SAME ONES THE PROS USE!

– Klein Wire Cutters / Crimpers

– Gardner Bender Auto Wire Stripper

– Dash Removal Plastic Pry Tools

– 3M Electrical Tape

– Install Bay Butt Connectors

1998 VW Beetle Audio Wiring Radio Diagram Schematic Colors

Here is the stereo radio wiring information for your 1998 VW Beetle body with the standard, symphony, Monsoon, or Bose systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your Volkswagen Beetle. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.

1998 VW Beetle Audio Wiring Diagram
1998 VW Beetle Audio Wiring Diagram

If you find any conflicting info please leave a comment with what you found in your VW Beetle. If you don’t see the audio radio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!

1998 VW Beetle Audio Wiring Radio Diagram Schematic Colors

Car Radio Constant 12v+ Wire: Red/White
Car Stereo Ground Wire: Brown
Car Radio Ignition Switched Wire: Yellow/Red @ Defroster Switch

Car Stereo Dimmer Wire:
Car Radio Illumination Wire:Gray/Blue @ Defroster Switch
Car Stereo Power Antenna:
Car Radio Amp Turn On Wire:

Left Front Speaker Wire (+) Positive: Light Blue/White
Left Front Speaker Wire (-) Negative: Brown/White
Right Front Speaker Wire (+) Positive: Red
Right Front Speaker Wire (-) Negative: Brown/Red

Left Rear Speaker Wire (+) Positive: Red/Green
Left Rear Speaker Wire (-) Negative: Brown/Green
Right Rear Speaker Wire (+) Positive: Light Blue
Right Rear Speaker Wire (-) Negative: Brown/Light Blue

Center Channel Speaker Wire Positive / Negative:

Subwoofer Speaker Wire Positive / Negative:

1998 Beetle Radio Pinout
1998 Beetle Radio Pinout

Radio Size: 1 Din – Single Din

Radio Removal: Requires VW Beetle Radio Removal Keys

Keep in mind if you are installing a new radio you need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well. During installation we recommend removing some of the plastic behind the OEM radio to help fit the new aftermarket radio all the way in the dash.

REQUIRED PARTS FOR AFTERMARKET RADIO INSTALL

WIRING HARNESS FOR NON AMPLIFIED:

Amazon Metra 70-1784 Radio Wiring Harness for Audi 88-99/Volkswagen 80-Up

WIRING INTERFACE FOR AMPLIFIED / MONSOON SYSTEM:

Amazon Metra 70-1787 Radio Wiring Harness for VW/Audi Bose Integration 1993-2007

MOUNTING KIT FOR SINGLE DIN AFTERMARKET RADIOS:

Metra 99-9008 Dash Kit For VW Beetle Kit 98-Up

ANTENNA ADAPTER FOR INSTALL:

Amazon Metra 40-VW54 VW Amplified Antenna Adapter

STEERING WHEEL CONTROLS ADAPTER:
Metra Axxess ASWC-1 Universal Steering Wheel Control Interface

RECOMMENDED TOOLS FOR THE INSTALL – SAME ONES THE PROS USE!

– Klein Wire Cutters / Crimpers

– Gardner Bender Auto Wire Stripper

– Dash Removal Plastic Pry Tools

– 3M Electrical Tape

– Install Bay Butt Connectors

1996 BMW 318i E36 Audio Wiring Diagram Radio Colors

Here is the stereo radio wiring information for your 1996 BMW 318i E36 body with the standard, symphony, or Bose systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your BMW. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.

1996 BMW 318i Audio Radio

If you find any conflicting info please leave a comment with what you found in your BMW 318i. If you don’t see the audio radio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!

1996 BMW 318i E36 Radio Wiring Diagram Audio Schematic Colors

Car Radio Constant 12v+ Wire: Red/White
Car Stereo Ground Wire: Brown
Car Radio Ignition Switched Wire: Purple/White

Car Stereo Dimmer Wire: Gray/Red
Car Radio Illumination Wire:Gray/Red
Car Stereo Power Antenna:White
Car Radio Amp Turn On Wire:White

Left Front Speaker Wire (+) Positive: Yellow/Red
Left Front Speaker Wire (-) Negative: Brown/Orange
Right Front Speaker Wire (+) Positive: Blue/Red
Right Front Speaker Wire (-) Negative: Brown/Orange

Left Rear Speaker Wire (+) Positive: Yellow/Black
Left Rear Speaker Wire (-) Negative: Brown/Orange
Right Rear Speaker Wire (+) Positive: Blue/Black
Right Rear Speaker Wire (-) Negative: Brown/Orange

Center Channel Speaker Wire Positive / Negative:

Subwoofer Speaker Wire Positive / Negative:

Radio Size: 1 Din – Single Din

Radio Removal: Refer to service manual

Keep in mind if you are installing a new radio you may need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well.

REQUIRED PARTS FOR AFTERMARKET RADIO INSTALL

WIRING HARNESS FOR NON AMPLIFIED:
Metra 70-8590 Radio Wiring Harness for BMW 90-02 Power/4 Speaker

WIRING INTERFACE FOR AMPLIFIED SYSTEM:
Metra 70-8591 Radio Wiring Harness for BMW Amp Integration

MOUNTING KIT FOR SINGLE DIN AFTERMARKET RADIOS:
None Needed

ANTENNA ADAPTER FOR INSTALL:
Metra 40-VW10 10-Inch VW Antenna Adapter

STEERING WHEEL CONTROLS ADAPTER:
Metra Axxess ASWC-1 Universal Steering Wheel Control Interface

RECOMMENDED TOOLS FOR THE INSTALL – SAME ONES THE PROS USE!

– Klein Wire Cutters / Crimpers

– Gardner Bender Auto Wire Stripper

– Dash Removal Plastic Pry Tools

– 3M Electrical Tape

– Install Bay Butt Connectors

2007 Jeep Grand Cherokee Audio Wiring Diagram Radio Colors

Here is the stereo radio wiring information for your 2007 Jeep Grand Cherokee WK body with the standard, symphony, or Bose systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your Grand Cherokee. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.

2007 Grand Cherokee Radio Audio Wiring

If you find any conflicting info please leave a comment with what you found in your WK Grand Cherokee. If you don’t see the audio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!

2007 WK Jeep Grand Cherokee Radio Wiring Diagram Audio Schematic Colors

Car Radio Constant 12v+ Wire: Red/Orange
Car Stereo Ground Wire: Black
Car Radio Ignition Switched Wire: N/A DATA – Red/Light Green or Pink/Yellow or Pink/Green @ Power Port

Car Stereo Dimmer Wire: Orange/Brown @ Climate Control Connector
Car Radio Illumination Wire: N/A DATA
Car Stereo Power Antenna:
Car Radio Amp Turn On Wire: N/A DATA

Left Front Speaker Wire (+) Positive: Dark Green
Left Front Speaker Wire (-) Negative: Dark Green/Brown
Right Front Speaker Wire (+) Positive: Gray
Right Front Speaker Wire (-) Negative: Gray/Brown

Left Rear Speaker Wire (+) Positive: Dark Green/Dark Blue
Left Rear Speaker Wire (-) Negative: Dark Green/Purple
Right Rear Speaker Wire (+) Positive: Gray/Dark Blue
Right Rear Speaker Wire (-) Negative: Gray/Tan

Center Channel Speaker Wire Positive / Negative:

Subwoofer Speaker Wire Positive / Negative:

SPEAKER WIRE COLORS AT THE SPEAKERS

Driver Door Pos + : Gray/Purple or Dark Green/Purple
Driver Door Neg – : Dark Green/Yellow or Gray/Yellow

Passenger Door Pos + : Dark Green/Purple
Passenger Door Neg – : Gray/Yellow or Dark Green/Yellow

Driver Dash Pos + : Gray/Orange
Driver Dash Neg – : Gray/Yellow

Passenger Dash Pos + : Gray/Dark Green
Passenger Dash Neg – : Gray/Light Green

LR Left Rear Door Pos + : Gray/Light Green
LR Left Rear Door Neg – : Gray/Dark Green

RR Right Rear Door Pos + : Dark Green/Light Green
RR Right Rear Door Neg – : Light Green/Gray

Front Speaker Size: 6×9″ Front Doors

Upper Dash Speaker Size: 3.5″

Rear Speaker Size: 6.5″ Rear Doors

Amp Amplifier Location: Cargo Area Behind Trim

Radio Size: 1.5 Din

Radio Removal: The panel around the radio is only held on by clips just use these pry tools and carefully pry it off. It may be tight if it was never removed before. Once removed the radio is secured with 4 Phillips screws.

Keep in mind if you are installing a new radio you may need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well.

REQUIRED PARTS FOR AFTERMARKET RADIO INSTALL

PACKAGE: DOUBLE DIN INSTALL NON AMPED SYSTEM INCLUDES ALL PARTS GRAY COLOR: Jeep Grand Cherokee 2005-2007 Double Din Navigation Radio Bezel Dash Install Kit with Standard Wiring Harness and Antenna Adapter – GREY

PACKAGE: DOUBLE DIN INSTALL NON AMPED SYSTEM INCLUDES ALL PARTS KHAKI COLOR:
Jeep Grand Cherokee 2005-2007 Double Din Navigation Radio Bezel Dash Install Kit with Standard Wiring Harness and Antenna Adapter – KHAKI

WIRING HARNESS FOR NON AMPLIFIED:
Metra 70-6502 Radio Wiring Harness For Chrysler 02-Up Power 4 Speaker

WIRING INTERFACE FOR AMPLIFIED SYSTEM:
Axxess CHTO-01 Chrysler CAN Amp Turn-On Adapter

MOUNTING KIT FOR SINGLE DIN AFTERMARKET RADIOS:
Metra 99-6507 Single DIN Installation Kit for Select 2004-2008 Chrysler/Dodge/Jeep Vehicles

MOUNTING KIT FOR DOUBLE DIN AFTERMARKET RADIOS: ** REQUIRES OEM NAV BEZEL ** Metra 99-6510 Chry/Dodge/Jeep with NAV 04-UP Dash Kit

ANTENNA ADAPTER FOR INSTALL:
Metra 40-CR10 Chrysler 2002 Antenna Adapter Cable

STEERING WHEEL CONTROLS ADAPTER:

Metra Axxess ASWC-1 Universal Steering Wheel Control Interface

RECOMMENDED TOOLS FOR THE INSTALL – SAME ONES THE PROS USE!

– Klein Wire Cutters / Crimpers

– Gardner Bender Auto Wire Stripper

– Dash Removal Plastic Pry Tools

– 3M Electrical Tape

– Install Bay Butt Connectors

2005 Jeep Grand Cherokee Car Audio Wiring Diagram Radio Colors

Here is the stereo radio wiring information for your 2005 Jeep Grand Cherokee WK body with the standard, symphony, or Bose systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your Grand Cherokee. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.

2005 Grand Cherokee Audio Wiring Diagram

If you find any conflicting info please leave a comment with what you found in your Grand Cherokee. If you don’t see the audio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!

2005 Jeep Grand Cherokee Radio Wiring Diagram Audio Schematic Colors

Car Radio Constant 12v+ Wire: Red/Orange
Car Stereo Ground Wire: Black
Car Radio Ignition Switched Wire: N/A DATA – Red/Light Green or Pink/Yellow or Pink/Green @ Power Port

Car Stereo Dimmer Wire: Orange/Brown @ Climate Control Connector
Car Radio Illumination Wire: N/A DATA
Car Stereo Power Antenna:
Car Radio Amp Turn On Wire: N/A DATA

Left Front Speaker Wire (+) Positive: Gray/Orange
Left Front Speaker Wire (-) Negative: Gray/Yellow
Right Front Speaker Wire (+) Positive: Gray/Dark Green
Right Front Speaker Wire (-) Negative: Gray/Light Green

Left Rear Speaker Wire (+) Positive: Dark Green/Dark Blue
Left Rear Speaker Wire (-) Negative: Dark Green/Purple
Right Rear Speaker Wire (+) Positive: Gray/Dark Blue
Right Rear Speaker Wire (-) Negative: Gray/Tan

Center Channel Speaker Wire Positive / Negative:

Subwoofer Speaker Wire Positive / Negative:

SPEAKER WIRE COLORS AT THE SPEAKERS

LF Driver Door Pos + : Gray/Purple or Dark Green/Purple
LF Driver Door Neg – : Gray/Yellow or Dark Green/Yellow

RF Passenger Door Pos + : Dark Green/Purple
RF Passenger Door Neg – : Gray/Yellow or Dark Green/Yellow

LR Left Rear Door Pos + : Gray/Light Green or Dark Green/Light Green
LR Left Rear Door Neg – : Gray/Dark Green or Light Green/Gray

RR Right Rear Door Pos + : Gray/Light Green or Dark Green/Light Green
RR Right Rear Door Neg – : Gray/Dark Green or Light Green/Gray

Front Speaker Size: 6×9″ Front Doors

Upper Dash Speaker Size: 3.5″

Rear Speaker Size: 6.5″ Rear Doors

Amp Amplifier Location: Cargo Area Behind Trim

Radio Size: 1.5 Din

Radio Removal: The panel around the radio is only held on by clips just use these pry tools and carefully pry it off. It may be tight if it was never removed before. Once removed the radio is secured with 4 Phillips screws.

Keep in mind if you are installing a new radio you may need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well.

REQUIRED PARTS FOR AFTERMARKET RADIO INSTALL

PACKAGE: DOUBLE DIN INSTALL NON AMPED SYSTEM INCLUDES ALL PARTS GRAY COLOR: Jeep Grand Cherokee 2005-2007 Double Din Navigation Radio Bezel Dash Install Kit with Standard Wiring Harness and Antenna Adapter – GREY

PACKAGE: DOUBLE DIN INSTALL NON AMPED SYSTEM INCLUDES ALL PARTS KHAKI COLOR:
Jeep Grand Cherokee 2005-2007 Double Din Navigation Radio Bezel Dash Install Kit with Standard Wiring Harness and Antenna Adapter – KHAKI

WIRING HARNESS FOR NON AMPLIFIED:
Metra 70-6502 Radio Wiring Harness For Chrysler 02-Up Power 4 Speaker

WIRING INTERFACE FOR AMPLIFIED SYSTEM:
Axxess CHTO-01 Chrysler CAN Amp Turn-On Adapter

MOUNTING KIT FOR SINGLE DIN AFTERMARKET RADIOS:
Metra 99-6507 Single DIN Installation Kit for Select 2004-2008 Chrysler/Dodge/Jeep Vehicles

MOUNTING KIT FOR DOUBLE DIN AFTERMARKET RADIOS: ** REQUIRES OEM NAV BEZEL ** Metra 99-6510 Chry/Dodge/Jeep with NAV 04-UP Dash Kit

ANTENNA ADAPTER FOR INSTALL:
Metra 40-CR10 Chrysler 2002 Antenna Adapter Cable

RECOMMENDED TOOLS FOR THE INSTALL – SAME ONES THE PROS USE!

– Klein Wire Cutters / Crimpers

– Gardner Bender Auto Wire Stripper

– Dash Removal Plastic Pry Tools

– 3M Electrical Tape

– Install Bay Butt Connectors

2006 Jeep Grand Cherokee Audio Wiring Diagram Radio Colors

Here is the stereo radio wiring information for your 2006 Jeep Grand Cherokee WK body with the standard, symphony, or Bose systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your Grand Cherokee. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.

2006 Grand Cherokee Audio Wiring Diagram

If you find any conflicting info please leave a comment with what you found in your WK Grand Cherokee. If you don’t see the audio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!

2006 Jeep Grand Cherokee Radio Wiring Diagram Audio Schematic Colors

Car Radio Constant 12v+ Wire: Red/Orange
Car Stereo Ground Wire: Black
Car Radio Ignition Switched Wire: N/A DATA – Red/Light Green or Pink/Yellow or Pink/Green @ Power Port

Car Stereo Dimmer Wire: Orange/Brown @ Climate Control Connector
Car Radio Illumination Wire: N/A DATA
Car Stereo Power Antenna:
Car Radio Amp Turn On Wire: N/A DATA

Left Front Speaker Wire (+) Positive: Gray/Orange
Left Front Speaker Wire (-) Negative: Gray/Yellow
Right Front Speaker Wire (+) Positive: Gray/Dark Green
Right Front Speaker Wire (-) Negative: Gray/Light Green

Left Rear Speaker Wire (+) Positive: Dark Green/Dark Blue
Left Rear Speaker Wire (-) Negative: Dark Green/Purple
Right Rear Speaker Wire (+) Positive: Gray/Dark Blue
Right Rear Speaker Wire (-) Negative: Gray/Tan

Center Channel Speaker Wire Positive / Negative:

Subwoofer Speaker Wire Positive / Negative:

SPEAKER WIRE COLORS AT THE SPEAKERS

Driver Door Pos + : Gray/Purple or Dark Green/Purple
Driver Door Neg – : Gray/Yellow or Dark Green/Yellow

Passenger Door Pos + : Dark Green/Purple
Passenger Door Neg – : Gray/Yellow or Dark Green/Yellow

LR Left Rear Door Pos + : Gray/Light Green or Dark Green/Light Green
LR Left Rear Door Neg – : Gray/Dark Green or Light Green/Gray

RR Right Rear Door Pos + : Gray/Light Green or Dark Green/Light Green
RR Right Rear Door Neg – : Gray/Dark Green or Light Green/Gray

Front Speaker Size: 6×9″ Front Doors

Upper Dash Speaker Size: 3.5″

Rear Speaker Size: 6.5″ Rear Doors

Amp Amplifier Location: Cargo Area Behind Trim

Radio Size: 1.5 Din

Radio Removal: The panel around the radio is only held on by clips just use these pry tools and carefully pry it off. It may be tight if it was never removed before. Once removed the radio is secured with 4 Phillips screws.

Keep in mind if you are installing a new radio you may need the radio removal keys, the wiring harness, the antenna adapter, and the mounting kit as well.

REQUIRED PARTS FOR AFTERMARKET RADIO INSTALL

PACKAGE: DOUBLE DIN INSTALL NON AMPED SYSTEM INCLUDES ALL PARTS GRAY COLOR: Jeep Grand Cherokee 2005-2007 Double Din Navigation Radio Bezel Dash Install Kit with Standard Wiring Harness and Antenna Adapter – GREY

PACKAGE: DOUBLE DIN INSTALL NON AMPED SYSTEM INCLUDES ALL PARTS KHAKI COLOR:
Jeep Grand Cherokee 2005-2007 Double Din Navigation Radio Bezel Dash Install Kit with Standard Wiring Harness and Antenna Adapter – KHAKI

WIRING HARNESS FOR NON AMPLIFIED:
Metra 70-6502 Radio Wiring Harness For Chrysler 02-Up Power 4 Speaker

WIRING INTERFACE FOR AMPLIFIED SYSTEM:
Axxess CHTO-01 Chrysler CAN Amp Turn-On Adapter

MOUNTING KIT FOR SINGLE DIN AFTERMARKET RADIOS:
Metra 99-6507 Single DIN Installation Kit for Select 2004-2008 Chrysler/Dodge/Jeep Vehicles

MOUNTING KIT FOR DOUBLE DIN AFTERMARKET RADIOS: ** REQUIRES OEM NAV BEZEL ** Metra 99-6510 Chry/Dodge/Jeep with NAV 04-UP Dash Kit

ANTENNA ADAPTER FOR INSTALL:
Metra 40-CR10 Chrysler 2002 Antenna Adapter Cable

RECOMMENDED TOOLS FOR THE INSTALL – SAME ONES THE PROS USE!

– Klein Wire Cutters / Crimpers

– Gardner Bender Auto Wire Stripper

– Dash Removal Plastic Pry Tools

– 3M Electrical Tape

– Install Bay Butt Connectors

2015 Chrysler 200 Car Radio Audio Stereo Wiring Diagram Colors

Here is the stereo radio wiring information for your 2015 Chrysler 200 with the standard, premium,  symphony, or Bose systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your 200. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.

2015 Chrysler 200 audio wiring diagram radio

If you find any conflicting info please leave a comment with what you found in your Chrysler 200. If you don’t see the wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!

2015 Chrysler 200 Car Audio Stereo Radio Wiring Diagram Schematic Colors

Car Radio Constant 12v+ Wire: Red
Car Stereo Ground Wire: Black
Car Radio Ignition Switched Wire: N/A CAN

Car Stereo Dimmer Wire: N/A CAN
Car Radio Illumination Wire:
Car Stereo Power Antenna:
Car Radio Amp Turn On Wire:

Left Front Speaker Wire (+) Positive: Gray/Purple @ Back of Radio
Left Front Speaker Wire (-) Negative: Gray/Yellow
Right Front Speaker Wire (+) Positive: Dark Green/Purple
Right Front Speaker Wire (-) Negative: Dark Green/Yellow

Left Rear Speaker Wire (+) Positive: Gray/Light Green
Left Rear Speaker Wire (-) Negative: Gray/Dark Green
Right Rear Speaker Wire (+) Positive: Dark Green/Light Green
Right Rear Speaker Wire (-) Negative: Dark Green/Gray

Center Channel Speaker Wire Positive / Negative: Gray/Brown & Gray/Orange @ Amp

Subwoofer Speaker Wire Positive / Negative: Gray/Brown & Dark Green Brown @ Amp

Subwoofer Speaker Wire Positive / Negative: Gray/White & Dark Green/White @ Amplifier

Front Speaker Size: N/A

Rear Speaker Size: N/A

Amp Amplifier Location: Passenger side behind glovebox

Radio Removal: See Service Manual

Keep in mind if you are installing a new radio you may need the radio removal  keys, the wiring harness, the antenna adapter, and the mounting kit as well. We always recommend using the appropriate interface adapters in case you want to reinstall your OEM radio later. See the links below to purchase these items.

RECOMMENDED TOOLS FOR THE INSTALL – SAME ONES THE PROS USE!

– Klein Wire Cutters / Crimpers

– Gardner Bender Auto Wire Stripper

– Dash Removal Plastic Pry Tools

– 3M Electrical Tape

– Install Bay Butt Connectors

2015 Chevrolet Tahoe Car Radio Audio Stereo Wiring Diagram Colors

Here is the stereo radio wiring information for your 2015 Chevrolet Tahoe with the standard, premium,  symphony, or Bose systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your Tahoe. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.

If you find any conflicting info please leave a comment with what you found in your Chevy Tahoe. If you don’t see the wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!

2015 Chevrolet Tahoe Car Audio Stereo Radio Wiring Diagram Schematic Colors

Car Radio Constant 12v+ Wire: Red/Purple
Car Stereo Ground Wire: Black
Car Radio Ignition Switched Wire: N/A DATA

Car Stereo Dimmer Wire: N/A Data

Car Radio Illumination Wire:
Car Stereo Power Antenna:
Car Radio Amp Turn On Wire:

Left Front Speaker Wire (+) Positive: Blue
Left Front Speaker Wire (-) Negative: Brown/Blue
Right Front Speaker Wire (+) Positive: Yellow
Right Front Speaker Wire (-) Negative: Yellow/Black

Left Rear Speaker Wire (+) Positive: Green
Left Rear Speaker Wire (-) Negative: Green/Black
Right Rear Speaker Wire (+) Positive: White
Right Rear Speaker Wire (-) Negative: Blue/Black

Center Channel Speaker Wire Positive / Negative:

Subwoofer Speaker Wire Positive / Negative: Blue/Gray & Gray/Black

Front Speaker Size: N/A

Rear Speaker Size: N/A

Amp Amplifier Location: Back of Vehicle Behind Rear Seats

Radio Removal: See Service Manual

Keep in mind if you are installing a new radio you may need the radio removal  keys, the wiring harness, the antenna adapter, and the mounting kit as well. We always recommend using the appropriate interface adapters in case you want to reinstall your OEM radio later. See the links below to purchase these items.

1998 BMW E36 3-Series 328i Car Radio Audio Stereo Wiring Diagram Colors

Here is the stereo radio wiring information for your 1998 BMW 3-Series E36 328i with the standard, symphony, or Bose systems. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires in your E36 328i BMW. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed.

If you find any conflicting info please leave a comment with what you found in your BMW 3-Series including the 328i. If you don’t see the wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!

Keep in mind if you are installing a new radio you may need the radio removal  keys, the wiring harness, the antenna adapter, and the mounting kit as well. See the links below to purchase these items.

1998 BMW 3-Series E36 328i Car Audio Stereo Radio Wiring Diagram Schematic Colors

Car Radio Constant 12v+ Wire: Red/White
Car Stereo Ground Wire: Brown
Car Radio Ignition Switched Wire: Purple/White

Car Stereo Dimmer Wire:

Car Radio Illumination Wire:
Car Stereo Power Antenna:
Car Radio Amp Turn On Wire:  White +

** FOUND AT BACK OF RADIO OR AMP **

Left Front Low Level Ouput to Amp Wire (+) Positive: Yellow/Red
Left Front Low Level Output to Amp  Wire (-) Negative: Brown/Orange
Right Front  Low Level Output Speaker Wire (+) Positive: Blue/Red
Right Front Low Level Output Speaker Wire (-) Negative: Brown/Orange

Left Rear Low Level Output Speaker Wire (+) Positive: Yellow/Black
Left Rear Low Level Output Speaker Wire (-) Negative: Brown/Orange
Right Rear Low Level Output Speaker Wire (+) Positive: Blue/Black
Right Rear Low Level Output Speaker Wire (-) Negative: Brown/Orange

** FOUND AT AMP IN REAR **

LF Tweeter Speaker Wire (+) Positive: Yellow/Black

LF Tweeter Speaker Wire (-) Negative: Yellow/Brown

LF Front Left Mid Speaker Wire (+) Positive: Yellow/Red

LF Front Left Mid Speaker Wire (-) Negative: Yellow/Brown

RF Tweeter Speaker Wire (+) Positive: Blue/Green or Blue/Black

RF Tweeter Speaker Wire (-) Negative: Blue/Brown

RF Front Right Mid Speaker Wire (+) Positive: Blue/Red

RF Front Right Mid Speaker Wire (-) Negative: Blue/Brown

LR Rear Left Tweeter Speaker Wire (+) Positive: Yellow

LR Rear Left Tweeter Speaker Wire (-) Negative: Brown

RR Rear Right Tweeter Speaker Wire (+) Positive: Blue

RR Rear Right Tweeter Speaker Wire (-) Negative: Brown

 

LF Woofer Speaker Wire (+) Positive: Yellow / Red @ Amp Pin 7

LF Woofer Speaker Wire (-) Negative: Yellow / Brown Pin 8

RF Woofer Speaker Wire (+) Positive: Blue / Red @ Amp Pin 9

RF Woofer Speaker Wire (-) Negative: Blue / Brown Pin 10

LR Left Rear Woofer Speaker Wire (+) Positive: Yellow/Purple or Yellow/Gray @ Amp Pin 11

LR Left Rear Woofer Speaker Wire (-) Negative: Yellow/Gray or Yellow/Black Pin 12

RR Right Rear Woofer Speaker Wire (+) Positive: Blue/Purple @ Amp Pin 5

RR Right Rear Woofer Speaker Wire (-) Negative: Blue/Gray Pin 6

Center Channel Speaker Wire Positive / Negative:

Subwoofer Speaker Wire Positive / Negative:

Front Speaker Size: N/A

Rear Speaker Size: N/A

Amp Amplifier Location: Driver side in trunk

Radio Removal: See Service Manual