Here is the info for bypassing the parking brake lockout on the Pioneer AVIC-6000NEX. It will be useful when installing an aftermarket radio, sound stereo system, or other automotive accessories. Make sure to grab the appropriate tools to test all the wires. Please check it over and use it as a GUIDE to help you locate the appropriate wires. This schematic is provided free of charge and may not be 100% accurate. Failure to properly test all the wires may lead to vehicle or bodily damage. All information is provided as-is and accuracy is not guaranteed. This information is provided for informational purposes only and should not be used while driving.

If you find any conflicting info please leave a comment with what you found with your AVIC 6000NEX AVIC-6000NEX Pioneer Radio. If you don’t see the audio radio wiring diagram you need comment and we will try to add it ASAP. Thanks for looking!

DO AT YOUR OWN RISK! No parts needed!

1. Ground the light green parking brake wire.

2. Turn the radio on and push the center menu button on the bottom.

3. Hit the AV icon button.

4. Hit the OFF icon from the AV screen.
5. Push and hold your finger on the bottom left of the screen about a half inch up and a half inch in for about 15 seconds or until you see a black box popup that says “Set On”

Once that black box pops up you are done!